How To Change 6v To 12v Power Wheels

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Learn How To Change 6v To 12v Power Wheels

Well, to learn how to change 6v to 12v Power wheels, you might need some technical knowledge. But, there’s nothing to worry about as we’ll make it simple for you.

Without harming the motor, you may increase the voltage of a 6-volt power wheel battery to 12-volts or a 12-volt battery to 18-volts. Include an inline fuse while replacing the battery to prevent the engine from overheating.

A power wheel toy car’s speed and performance can be improved by increasing the battery capacity. While there can be many ways to do it, we’ll share only the most simple way to change 6v to 12v. Overall, the discussion will be diverse and you’ll find it resourceful in ways more than one.

Upgrading Power Wheels Battery

When it comes to the performance of stock batteries on power wheels, many customers are dissatisfied. Circuits that are weak and sensitive frequently deteriorate their performance. The stock batteries’ charging times are perhaps the most vexing. The lead-acid batteries take 12–18 hours to charge and provide 1–3 hours of fun.

The long charging durations become a liability when a child is itching to drive the drivable toy. So you may need to acquire a backup battery and swap them out when one runs out. Rather than buying a new battery, you should upgrade it. Your kid will appreciate the faster charging and better performance.

Power Wheels batteries can be upgraded in two ways currently. Popular sealed lead acid batteries are available. You can also utilize power drill lithium batteries. In the next two sections, we’ll talk about these two types of batteries. After that, we’ll talk about upgrading battery from 6v to 12v.

Lithium Ion Battery

Lithium-ion batteries are problematic because they deliver too much power. A power tool battery discharges 5X faster than a SLA battery.

The extra power from a lithium power tool battery destroys a power wheels car’s engine and wears out the gears. The ride on and your youngster are both at risk if the motor overheats. Fortunately, using a 30 or 40-amp fuse with a lithium-ion battery avoids this risk.

Installing a lithium battery in a ride-on automobile may require changes due to different connector systems. Luckily, it doesn’t require any unique talents; anyone with a few basic tools can do it well.

Lead Acid Battery

SLA batteries contain plates, lead, and a lead oxide solution containing 65% water and 35% sulfuric acid. Starting or cranking rides on autos deliver a quick surge of energy.

Sealed batteries are valued for their leak-proof design and hassle-free operation. They last 3–5 years, making them ideal for ride-on cars. Sealed batteries are protected by high impact ABS plastic casings that endure shock, vibration, and heat.

Most parents choose sealed batteries because they are easier to replace. Most have a 30-40-amp fuse and a 12-amp rating. Installing a battery with an inbuilt fuse saves time and money, while a 12 amp rating extends run duration. Can You Use any 12V Battery Power Wheels.

Is it Possible to Change 6v to 12v Power Wheels?

It is possible to upgrade 6-volt power wheels to 12-volt power wheels without causing damage or burning the car. Although some of these drivable toys use a 6-volt battery, the majority of them use a 12-volt motor. As a result, they can withstand the higher voltage without being destroyed.

You have two alternatives when converting a 6-volt ride to 12-volts: build a battery pack with two 6-volt batteries or add a new 12-volt battery. Best Choice 24v Upgrade.

Upgrade 6v to 12v Battery

  • Disconnect the battery connections and lift the super wheels out of the automobile.
  • Side by side the two batteries To raise the battery pack’s voltage, connect two 6-volt batteries in series. It involves connecting the positive and negative terminals of two batteries. It’s easier with the batteries together.
  • Remove one battery’s connector. Cut both cables from one battery, allowing enough overhang to connect to the other.
  • Negative wire on other battery cut. Cut the negative wire of the second battery in half.
  • Glue the opposing ends. Connect the negative terminal of one battery to the positive terminal of the other.
  • Connect the open negative terminal. Complete the circuit by crimping the remaining loose wires into a butt connector.

Final Steps to Upgrade the Battery

  • Glue the two cells. A wire should connect the positive and negative terminals of the first and second batteries. A wire from each battery’s positive terminal to the connection. Wrap the batteries in duct tape.
  • Replace the super wheel battery. The 12-volt battery pack may be too big for the ride-on. Adjust the angle until it’s snug. Not every item will fit the larger battery.
  • Battery sync The battery and motor connections are standard Power Wheels. Connector to hood closure
  • Drive the turbo. Start the super wheel and spin it.

How Good is Upgrading the Battery?

Some parents are concerned about changing a ride-battery, on’s especially after reading contradictory reviews online. While there are some hazards to replacing the battery, the advantages outweigh the risks.

Most importantly, all dangers associated with battery upgrades can be eliminated.

Changing the battery is less expensive than buying a new ride-on. Kids outgrow 6-volt and 12-volt power wheels quickly. Upgrading the battery doubles the ride’s speed and enhances performance.

Safety Considerations After Battery Upgrade

Upgrading a Power Wheels battery doubles its speed and performance. Higher speeds increase your child’s risk of an accident, toppling, rolling, or wheelie.

To avoid all of this:

  • Ensure your child’s driving skills
  • Set a speed limiter
  • Add weight to the front of the power wheel.
  • Ride on only the correct terrains
  • Anyone can upgrade a power wheels battery with the right equipment, skills, and safeguards.

A 12-volt power wheels battery can be converted to an 18-volt battery in two ways: by adding a 6-volt or by inserting an 18-volt battery.

Final Thoughts

Generally, you may convert a 6-volt battery to a 12-volt battery and a 12-volt battery to an 18-volt battery without harming the drivable toy. How Fast Does A 6 Volt Power Wheel Go.

To prevent the motors from overheating and catching fire, you can install a 30 or 40 detachable Automotive Type Fuse (ATF). It may also damage the battery.

Both a lithium-ion power tool battery and an aftermarket Sealed Lead Acid (SLA) battery are excellent options. Lithium batteries are smaller, lighter, and require less time to charge. Make certain that your youngster is capable of handling the increased speed that comes with updating power wheels batteries.