How to Charge a Power Wheels Battery with a Car Charger

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Well, now the question is How to charge a power wheels battery with a car charger? If you lose your power wheels battery charger, you can charge the power wheels battery with a car charger. Below, we will discuss how to charge a power wheels battery with a car charger.

Power wheels are a very popular toy car for kids. They love to drive these cars and want to spend their whole time with them. Moreover, these ride-on cars help children grow up in many ways. Even, it also helps a lot to increase their driving skills. On the other hand, Cars are equipped with batteries, so they need to be charged. But did you know that with a car charger you can charge your power wheels battery?

How to Charge a Power Wheels Battery with a Car Charger

You can easily make water power wheels battery with a car charger. This will not be a very difficult task for you. When you connect the car’s battery to the power wheel’s battery, before that you need to check if the power wheels battery has the correct voltage. Typically, older power wheels are equipped with 6v batteries. But if it’s new, it might be a 12V or 24V battery-powered car.

A car battery is equipped with 15 volts. With it, you can charge a maximum of 15V power wheels battery. If you want to charge a battery of more than 15 volts, the car battery may burn out. So you can never consider charging a 24V power wheels car. However, you can easily charge a 12V power wheels battery with a car charger. If you don’t know how to charge the power wheels battery. To get more details, you can simply follow this guide How To Charge A Power Wheels.

Identify the positive and negative connections before charging the power wheels battery with the car charger, and connect with them. This way it will be very easy for you to charge the power wheels battery. However, if you find that the car charger gets too hot while charging, you can use a 2A trickle charger. It will be good for you and also safe.

Some Alternative Ways to Charge Your Power Wheel Battery

Below we will discuss other ways you can charge your Power Wheels battery. So let’s get started without delay. Are you interested to know How Long Does It Take For A Power Wheels Battery To Charge. To know extra info, click on this link.

DIY a Replacement Charger

If you want to DIY a charger for dedicated use for power wheels toys. Then you need to have the following tools at hand.

  • DC to DC step-down converter.
  • Two alligator clips.
  • Laptop charger.
  • Its cutter.
  • Multi-meter.

If you are sure that all of the above tools are at your fingertips. Now you can follow the below steps.

Step 1

First, the outer sheath of the adapter jack wire must be removed with a cutter. Now connect the adapter wire to the toy battery. Connect well, so that it does not run away when pulled.

Step 2

Now, the step-down converter needs to be connected. The step-down converter needs to have its outer shell removed before connection. When you remove the outer shell, you will see two wires. One is red and the other is black. You must connect the red wire to the positive connection (IN +) of the step-down converter module. On the other hand, the black wire must be connected to the negative connection (IN-).

Step 3

Once you have completed the second step. Now you need to attach the red alligator clip to the positive. Then, Clap the black clip with the negative. When you go to attach the alligator clip, you will see labels for positive (OUT +) and negative (OUT-). For this level, you can easily understand which is positive and which is negative.

Step 4

Now you plug the charger adapter into a power source. At the same time, connect the alligator clips to the multimeter to set the voltage correctly. Set the voltage potentiometer to 14 volts with your screwdriver.

Step 5

The voltage must be adjusted in the multimeter until 2 amps or more is registered. When charging the battery, you must make sure that the battery is not overcharged.

From Directly Power Supply

You can charge your Power Wheels car directly from the power source. Generally, everyone charges their car battery directly from the power source. But there are some things you need to know, if you don’t know, you may get into a big accident. When you charge the battery directly from the power source, you need to adjust the voltage.

Moreover, if there is a way to limit the current, you can charge the batteries of the power wheels with a rosary power source. Many people do not notice these things, due to which their batteries do not serve for a long time. Finding the charge voltage of the power source can be an initial step for you. You must set the voltage when you charge the battery, then charge.

If your child’s power wheels are equipped with an 8V or 12-volt battery. So when you charge the battery directly from the power source the power supply should be more than 6V, 2A and 12V, 2A respectively. But if the toy car battery can’t withstand your set current, you can definitely use a resistor to reduce the current. If you notice that your power wheels is not charging, to get more details, you can simply follow this guide How Do I Know If My Power Wheels Battery Is Charging.

Conclusion

Kids lose everything easily, even the power wheels battery charger. But you need to charge your child’s toy car battery in an alternative way. In that case, you can charge the power wheels battery using your car charger. In a very short time, you can set up everything to charge the battery, even all set up is very easy. We hope that you find out through this article how to charge a power wheels battery with a car charger.