Best Power Wheels Motor Upgrade

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Are you looking for the best power wheels motor upgrade for your child? Then there is no reason to worry, you have come to the right place. In this article, we will show you the complete process of upgrading the power wheel motor in the most effective way.

A motor is directly connected to the performance of the power wheel. Because all the other functions get the required energy from the motor. So the better the motor, the better the power wheel performance. Whenever you upgrade your battery or tire traction, try upgrading your motor as well. In this way, the force of the power wheel will be maintained. So keep reading to know the actual process of the best power wheels motor upgrade.

Best Power Wheels Motor Upgrade Method

Upgrading the motor of children’s electric cars increases speed and power. As a result, your child will be able to enjoy a better ride than before. So let’s move on to the main process. To upgrade the power wheel’s motor, some necessary tools are needed. They are as follows:

Required Tools

  • A fresh motor
  • A screwdriver
  • Heat sinks
  • Some wires
  • Electrical tape
  • Push nuts

It is best to have specific equipment to disassemble the motor parts. Wire and tape are kept here for emergency work. If the wire is cut for any reason, it will not be possible to remove it.

The Process of Upgrading the Motor

First of all, you need to collect a motor that is compatible with the battery voltage or can handle the voltage. This is why you can order a motor from eCommerce sites that are popular in your area.

Step 1

All you have to do in the first step is create the access to remove the motor. This is because there is a risk of damage when removing the battery. To do this, remove the wheels from the axle which will allow you to access the gearbox. Now disconnect all the wires which will create easy access for you to remove the battery. However, when opening the gearbox, make sure that it does not cause any damage.

Step 2

Now it’s time to remove the motor. To do this, unscrew the old motor box with a screwdriver. The motor comes with a metal head that you can easily remove with a screwdriver. Now remove the motor. When removing the motor, make sure that no wires are damaged or torn.

Step 3

The new motor must be set with a gearbox. Before replacing the motor, install a new metal flat head. This will help the flat head gear to rotate smoothly. But don’t forget that the teeth of this flat-head are the same as the old motor. If the number of teeth is more or less, it will affect the power wheel performance. When the new motor is set properly, then close the motor box.

Step 4

All you have to do at this stage is connect the motor. However, most electric car motors come with basic connectors. Similarly, some loose wires indicate a wiring connection. Then connect the blue wire with the blue wire and the black wire with the black wire to the motor connector. Strip and crimp the wires together to make an effective connection. This time, cover the exposure wires with electric tape for protection.

At this time test the gear and see if the car is moving according to the direction. By the way, if you do not like the connectors with the previous motor, you will find some fancy connections from the local electric store. You can use them as connectors to your child’s power wheel motor.

Step 5

Now add the heat sinks. They protect the motor from overheating. Although they are not a mandatory requirement but useful for longevity. Setting them up is just a matter of minutes which will keep your child’s car motor cool.

Step 6

After installing the new motor it is time to re-fix the wheels and test the power wheel. So press the start button of the vehicle to see if it is working. If this is OK, check the gear and make sure it is moving in the same direction. This is why it is best to give your child a test drive. Then once the vehicle starts moving properly, your motor installation is successful.

Tips for Maintaining the Power Wheel’s Motor

Regular Cleaning

Many parents do not clean the power wheel of their children. As a result, it causes problems in a short time. Sometimes they even get damaged. To avoid this, regular motor cleaning is not an option. If you want to protect the stability of your child’s power wheel motor, clean the motor once every 2 to 3 months.


Lubrication will help the power wheel to stay friction-free. This will reduce the wear and tear of the motor. Moreover, there is no need to do more lubrication of the power wheel. Just doing it once is enough. One thing to note when using lubricant. Whether it is approved or not. Otherwise, the power wheel’s motor may be damaged.

Keep the Hardware Cool

The power wheel’s motor automatically heats up when the kids drive for long periods. Besides, other parts connected to the motor also get hit a bit. When this overheating goes too far, it can cause various problems. It can even disable the power wheel. As a parent, you probably don’t want that.

There is a convenient and easy way to overcome this situation. That is to use hit sinks. These heat sinks allow the motor to cool. So whenever you replace or upgrade the motor, don’t forget to add some hit sinks. They preserve the motors of electric vehicles from integrity or overheating.


The power wheel is something that kids spend a lot of time playing with. The motor is a big part of running this power wheel. If the motor is not upgraded after a certain period, it will influence the performance of the power wheel. This guide provides a way to properly upgrade the power wheel. However, if you want to give your child a better riding experience, you need to do some maintenance.