Can You Paint A Power Wheels Car

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Can you paint a power wheels car? This article is for those who are looking for the answer to this question. In this article, we will discuss how you can decorate a Power Wheels car with the color of your choice.

You can paint your Power Wheels car as you like. That’s why you need to remove the spray paint before it is on the power wheels. Slowly remove the power wheels spray paint with a screwdriver. And the power wheels need to be thoroughly cleaned and dried. Now you are ready to paint your child’s power wheels with the color of your choice.

Why You Should Use Child-Friendly Paints?

Kids love to play with toys of their own choice. This may be an excuse for your child to use their power wheels in a new color. Or if your child’s power wheels are getting old, and if the color is worn out. Then you have to make your child more attracted to his power wheels,

You can refresh the power wheels at once with the color of your child’s choice. If you do this your child will have a new partner to play with and they will enjoy driving it. Even, they will spend their best time with it again. If you are interested to know How Long Will Power Wheels Battery Last? Check out this guideline.

How to Paint A Power Wheels Car

To paint your power wheels in a new way and to succeed in this project, you have to go through several steps. Below we will discuss how you can paint a power wheel from start to finish. However, if you want to paint the power wheels without proper preparation, you can get unwanted results. However, you will need the following items to paint Power Wheels.  If you want to know How Fast Are Power Wheels? Then read this guideline by clicking on the link.

  1. Masking tape.
  2. Self-protective gear.
  3. Spray paint.
  4. Soapy water.
  5. Moist paper towels.
  6. Mineral spirits.
  7. Grit-sandpaper.

Step 1: Clean the Power Wheels

At first, clean the power wheels thoroughly with soap and water. The reason for washing the car with soap and water before is to remove most of the stains and dirt from it. This is because after removing stains and dirt, you can easily detect any chips, dents, and rust on it.

Now use Grease and Wax Remover to remove worn-out paint and rust from the car. Grease and wax remover is a non-polar solvent like mineral spirits. It can dissolve things that you can’t do with water. Now with a damp paper towel, apply the mineral spirits directly on the rust or scraps on the car.

Step 2: Sand Your Custom Power Wheels

You need to take out the plastic parts in the power wheels. These should be well sanded with 220 grit plastic sandpaper. Try using medium-grade sandpaper, and rub the sides of your car well on only one side.

Remember, do not rub the car too hard. Because if you rub hard, the plastic can easily scratch. Rub the car’s plastic shots like this with medium-grade sandpaper.

Step 3: Dry the Power Wheels

After completing the second step, you clean your car. If there are any cracks that you cannot reach, you can use compressed air to clean them. Because for priming and painting your kid’s power wheel needs to be clean. This time you can also use a cloth to dry the power wheels. Before moving on to the next step, make sure your power wheels have no more water.

Step 4: Prepare the Power Wheels for Priming

You must select a place to prime your power wheels. It would be best if the place is dust-free. However, it is important to have a good ventilation system, which helps to remove dust and other contaminants. Even, it helps to remove residual paint and paint from the house for ventilation.

Step 5: Wear Protective Gear

You must wear self-protective gear when paving. It is important to wear it. This is because these paints contain toxic substances, which are very harmful to your body. Even, the color of the paint does not stick to you, it will protect you from that too. That’s why you should wear it for the safety of your body.

Step 6: Prime the Power Wheels

Primer is essential to give your painting work a more ideal surface. This helps to hold the paint in place with your power wheels. Even, this keeps your car free from rust. Moreover, it gives the paint a uniform look across your wheel and provides a smooth color across the surface of the paint.

After priming, inspect your power wheel carefully to see if you find any marks. If you see a stain or can identify an error. Then you have to primer those places again. But first, you have to sand the bottom of the primer. This is the ultimate option for perfecting your wheels before you start painting.

Step 7: Paint the Power Wheels

Now after the priming process you need to start painting. You can use oil-based spray paint, as it costs less and benefits more. Now spray smoothly across the surface of your power wheels. Do not paint too slowly. Otherwise, if you paint too quickly, you’ll get better coverage.

You can use 2 or 3 coats to paint your power wheels well. Wait a few minutes between the two coats and paint. If you paint like this you will be happy with the result. Finish painting the whole power wheels in the same way.

Step 8: Reassemble the Power Wheels

If you have finished all the painting work, now you can reassemble your power wheels. Hopefully, you will be surprised by the results. Even your kids will love it.  Are you looking for best ride on cars for 11 year olds? Then click on here.

Conclusion

As you can see above, we have discussed in detail how to make a power wheel in water. If you paint your power wheels properly following the above steps, you will get good results. Hopefully, by reading this article you can easily paint your power wheels.