Well, as you may know that all power wheels are made of car wheel plastic, which loses traction over time. Moreover, adding a layer of rubber to the wheels of the toy car means that the power wheels add traction to the toy car. Do You Know How To Make Power Wheels Grip Better? If you do not know then this article is for you.
These plastic wheels for toy cars are not as durable. But if good traction is added to it then they tend to rot on grass, mud, or even snow. If your child’s power wheels do not have good traction, the car cannot move forward or backward which can be quite annoying for a child. In this article, we will discuss how to make Grip Better for Power Wheels. So let’s start with the details.
How to Make Power Wheels Grip Better
You need to be extra careful when you add traction to increase the wheel grip of your child’s car. This is because a small defect can make the tires uneven when you cut the replacement rubber. This affects the overall stability of your child’s power wheels. However, to improve the grip of the power wheel you need to add traction and at that time you will need the following tools.
- Screw
- A pair of scissors
- Screwdriver drill
- Its cutter
- Manual screwdriver (in case of drill error)
Before you start the whole process make sure you have all the tools above. The whole process is very simple and highly recommended to improve the grip of the car if your child does not drive frequently through difficult terrain. There are several ways you can improve the grip of your child’s toy car, so let’s find out. To get extra info, follow the best power wheel for big kid.
Fitting New Traction Band
The most effective way to increase the grip of your child’s power wheels is to add a traction band to the wheel. These traction bands are attached to the tires of almost all power wheels. These traction bands are good for your child’s power wheels car grip and can move the car forward much faster.
If you attach traction bands to the wheels, the plastic wheels do not need to be replaced with rubber. All Power Wheels car models often have specific traction bands that you can buy. Moreover, these traction bands are usually easy to install on the power wheel without any problems. If you want to get more details, learn about the best ride on cars for 7 year old.
Adding Rubber Strips
Another effective way to increase the grip on the wheels of your child’s car is to add a rubber strip to the wheel. You can save a lot of money through this process. Don’t worry, it’s a very effective process. Moreover, these rubber strips act as superior treads, improving the grip of the toy car wheels on any surface. However, this process is a bit like duct tape.
On the other hand, rubber strips are not as durable as your other options. But if you want to improve the grip of the car wheel by spending less money, then we think this process will be suitable for you. To get extra info, follow How to Make Power Wheel Faster.
Install a New Rubber Tire
If the traction of your child’s power wheels does not work well, you may choose this step. This is a very effective step, which will give you a permanent solution. If you notice that the car wheel traction band is not improving the grip of your power wheel car. Then you have to consider changing the tire of the toy car. It is best if you add new rubber tires to the wheels of your child’s car.
However, you need to choose a rubber tire that matches your car model. In the market you will find many kinds of power wheels cars, all come with a specific model. So first check the model of your Power Wheels car and choose new rubber tires according to that model. You will need to apply a DIY project to add new rubber tires to the car. Follow these steps to properly install new rubber tires on Power Wheels cars.
Step 1
You have to choose a tire, which matches your Power Wheels car.
Step 2
To install new tires in a Power Wheels car you need to find a flat place. Where you can work easily and have all the tools you need. However you will need a table or raised surface where you will work, it will be helpful for your work.
Step 3
Now keep your child’s Power Wheels car in an upright position. As if you can easily get access to a car tire and wear it out.
Step 4
Once the car is set up properly, loosen the retainer cap, retainer, hubcap, and finally the tire one by one. Don’t rush, work slowly and you will succeed. You will need a screwdriver to open these parts. If all the parts fall apart, remove them from the car.
Step 5
Attach the new tire tightly to the wheel space. Once the tire is attached, install the hubcap, retainer, and retainer cap one by one. Do it slowly and install firmly.
Step 6
If everything is installed in the car, check the car with a test drive to check if everything is OK. If you see that everything is fine, now you can hand over the toy car to your child.
Step 7
Now test the new rubber wheel with a test drive to see if everything is OK. If all goes well you can now move your child’s car to enjoy the new trip.
Final Thoughts
If your child’s car wheels have good traction and grip. Then you can be sure that your child is driving safely and having fun with their car. Moreover, having a good grip on the wheel of a toy car means that it keeps the car from slipping or getting stuck in the dirt. Besides, if the wheels of your child’s power wheels are made of plastic, you may want to add a traction band to them.
