Battery Life Time: How Long Do Power Wheels Batteries Last
Are you looking for a new Power Wheels toy for your child? They are easily the most popular toy in the United States and Canada, and for good reason. They are just so darn cute and well, they just go! The best part about these vehicles is that they can be used over and over and over again! So, how long do Power Wheels toys last? Well, that depends on how you use them. If you let your Power Wheels toy sit in the garage, it will last for years. If you use them on a regular basis, they will start to lose their charge in about 3 months.
How To Charge The Power Wheels Battery
If your kid’s ride-on toy shuts down before starting, it means its battery is low. Then you have to charge the battery by plugging the charger into the wall outlet. After that, connect the cables of the charger to the battery. Now, charge the battery for 18 hours for the first time. Keep in mind, do not charge up to 30 hours. Because charging for up to 30 hours will damage the battery itself. Then, remove the charger from the wall outlet.
How Long Does The Charging Of A 6 Volt Battery Last
If the power wheel battery of your kid is 6 volts, then it will ride for 45 minutes. Because the 6 volt battery stores the least voltage. Therefore, if your kid uses the power wheel continuously for 45 minutes, it will stop working.
How Long Does Charging Of A 12 Volt Battery Last
The battery with 12 volts relatively contains more voltage than the battery with 6 volts. If the battery is fully charged, it will last for 1 to 2 hours maximum. Do not charge the battery above the recommended time. If you do it in reverse, you will damage your ride-on toy.
How Long Do Power Wheels’ Batteries Last
As we know, each model of power, wheels has batteries of different voltages. However, the lifespan of a battery depends on your care and use. If you maintain the power wheels battery, it will last for 2 to 3 years. It is the standard lifespan of the toy ride battery.
Why Do The Power Wheels Batteries Fail
The main reason for batteries to stop working is that they have not been used for a long time. But it does not mean that they are fully out of work. These batteries require ideal maintenance and care when you do not use them. If the battery is fully discharged, this leads to sulfation. And the capacity of the battery is reduced.
Tips To Increase The Lifespan Of A Battery
Here are some tips to increase the lifespan of a power wheel battery. Follow the next steps;
- Take the cell out of the ride-on toy if you are going to store the toy for 3 to 4 months. It helps you avoid the risk of the battery dying.
- Do not charge the battery for any longer than the manufacturer’s recommended time. Read the manual instructions that came with the power wheel.
- Charge the battery for at least 18 hours and up to 30 hours. Do not cross that time limit, otherwise, you will damage the toy.
- Maintain the vehicle’s running time by properly caring for the battery and the toy.
What Should I Do When The Battery Does Not Hold Charging
When a power wheel’s battery can no longer hold a charge, it should be replaced. If you have a 6 volt battery that can not hold a charge, replace it with a high voltage battery. On the other hand, if you want to upgrade the battery, then replace the old battery with a bigger one that you need.
Ways To Charge Power Wheels cars
DIY A Replacement Charger
IF you have opted for this option, you might require the following tools for that:
- DC to DC converter
- Laptop charger
The first thing you have to do is to make some modifications to a laptop charger. You have to cut the adapter jack and clean the outer coating. You can do it with the help of a wire cutter.
The second thing you have to do is to connect the DC to DC converter. However, you have to be careful in this step. You must place the red wire with the positive connection and the black wire with the negative connection.
Now you have to plug the adapter into the power source and connect the multimeter. The rules in this connection are the same, black for negative and red for positive.
Lastly, you have to set the multimeter voltage accurately. With a screwdriver, you can easily adjust the voltage.
Using Power Source Directly
Batteries can be charged directly from the power source if the voltage is adjustable. However, figuring out the voltage of the battery is the primary concern. Most of the power wheels are between 10 – 15A. Therefore, you have to adjust the voltage accordingly. To easily do the operations, you can add a resistor, so the power wheels battery so it can withstand the current you are providing it.
Go For The Replacement Charger
Sometimes money can provide you with an easy alternative to everything. Same is the case with a replacement charger, and if you can afford it, it is the most uncomplicated option. But always try to find a replacement charger that is compatible with all types of batteries.
How To Modify The Battery
Moreover, with care and caution, you can increase the lifetime of the power wheel battery. Despite that, if the battery is out of work, you can modify it. To modify the low voltage battery, replace it with another battery with a higher voltage power. To do so, take out the battery from the toy. Unplug the wires from the motor. Place the new battery and connect the wires to the motor. Then, check the working and charging capacity of the new battery. This will increase the speed and power of the ride-on cars.
As we know, the battery is the heart of a power wheel. The running capacity of the power wheels depends on the battery. Moreover, the charging of the battery decides the running time of the toy. So, the batteries need your care, caution, and maintenance for proper functioning. The ideal maintenance of these will last for 3 to 4 years. Furthermore, it will help you save money by not buying a new battery every few months. Follow the tips to reduce the risk of the battery dying.