How To Run Power Wheels Off Drill Battery

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Tutorial- How To Run Power Wheels Off Drill Battery

Well, the tutorial that we have on our hand is- how to run power wheels off drill battery. So, why we need to do this in the first place? Converting power wheels to drill battery will give it better speed and riding quality. There’re many ways you can run the power wheels off drill battery.

To save money, the battery and charger from a broken power tool can be used to power the DIY drill conversion. Reusing old power tool batteries in this way is an excellent approach to reduce landfill waste. One of the world’s most hazardous battery kinds is lithium-ion!

Our landfills and future generations could be contaminated by the battery’s lead, mercury, and cadmium emissions. As a result, drill batteries are an excellent choice for electric vehicles.

Steps to Drill Battery Conversion- Run Power Wheels Off It

Find the Original Battery

To begin, look inside your Power Wheels for the battery. Anywhere in the vehicle, including in its trunk or under its hood, can be an ideal location.

Remove it from the vehicle by unplugging it from the wiring harness and maybe prying a bar out of its way. Where To Store Power Wheels.

Drill Battery and Stock Battery Modifications

We’ll need the connector plug, so we’ll cut the two wires that connect to the stock battery. The stock battery will no longer be usable as a result of this. Using a 3D printed DeWalt battery adapter, we’re going to use the factory battery connector plug to complete this project.

To begin, just twist the wires together and secure them with electrical tape to form a connection between the negative (black) wire and the other black wire. We want to connect the positive (red) wires as well, but we’ll use a 30 amp inline fuse to protect them. As a safety measure, this fuse is designed to halt your motor in case of an overload. 

Connections for the Drill Battery

Now that we’ve completed the wiring, it’s time to put everything together. Please double-check the fuse location. The battery adapter holder has Velcro on the back that you may use to attach it to the car.

A speed controller kit should be installed so that you may adjust the amount of power going to the wheels and allow your youngster to gradually adapt to their newfound power.

Try Out the Power Wheels

Pressing the gas pedal and seeing the rear wheels spin is a good way to make that the battery and motors are working properly. Right away, you’ll see a significant improvement over the original batteries.

Lithium-ion tool batteries are also much lighter than the 12v or 6v batteries you started with, enhancing the pace of the trip even further. How To Test Power Wheels Battery With Multimeter.

How Many Batteries Can I Use?

Instead of using a single battery, you can use two batteries instead. The Power Wheels’ operating time will be more than doubled as a result of this modification. The batteries should be connected in series. The motors will get 36v-40v of electricity if you don’t.

While this may sound appealing, you will not only rip up the lawn, but you will also push the Power Wheels’ electric components too far. When your motors and gearbox are both constructed of plastic parts, it will simply rip them apart. How To Upgrade Power Wheels To 24v.

Power Wheels Drill Battery Advantages

  • Do-it-yourself battery installation doesn’t necessitate the expertise of a professional technician. You must, however, have a fundamental understanding of electrical operations and be familiar with the working of a fuse.
  • Due to the fact that the factory battery weighs approximately 10 pounds, the car will be even lighter as a result of the smaller battery.
  • Lithium batteries can be stored in bulk and recharged considerably more quickly than other types of batteries, allowing you to always have a spare on hand.
  • On account of its considerable torque, the vehicle has a chance of undergoing a power slide when it comes to an end of motion.

Power Wheels Drill Battery Disadvantages

  • Adding more powerful batteries will put additional strain on the motor, potentially causing it to burn out. It is suggested that the motor be upgraded.
  • If you don’t upgrade the gearbox, not only the motor but also the gearbox will be ground down.
  • Because of all the power, the wheels may spin if you don’t add traction.
  • With the increased strength and speed, it’s time to bring the kids’ helmets out.
  • The run time of a low Ah battery will be shorter than that of a 12V or 6V battery. For every 1.5Ah, for example, you can expect 15 minutes of run time. You can avoid this by using greater Ah batteries or connecting them in parallel.

The Safety of Battery Conversion

  • Now that children’s toys have been turbocharged, it is imperative that safeguards be put in place to keep them safe. It’s possible that the new, more powerful bike will tip over.
  • At the very least, youngsters should wear helmets and the age limit should be raised.
  • In the event that an ESC was not installed, only the older children should be allowed to ride in an area that is safe and free of risks.

DIY Tips for Power Wheels Batteries

  • Remember to replace the first battery once it dies, Do it if you want to extend the life of a standard motor and gearbox. Give the components a chance to cool down.
  • Replace worn-out components, such as the motors and gearboxes, as soon as possible.
  • Add a distribution block to keep the cables neat and tidy.

Final Thoughts

So that’s how you use a drill battery to convert and run power wheels off with it. A few basic, yet detailed steps have been provided to assist you in converting your power wheels to drill battery. A successful DIY project can be achieved if you can follow the instructions with patience.

Overall, we’ve discussed several topics related to Drill batteries. For example- we’ve talked about its advantages and disadvantages. Moreover, safety tips, as well as, conversion tips are also there. So, we hope that it was an interactive blog post.