How to Replace a Power Wheels Battery

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

If you searching for how to replace a power wheels battery, you have come to the right place. In this article, we are going to discuss a complete process to replace the battery of a power wheel.

Perhaps, the power wheel is one of the best children’s plays items. But at some point, the power wheel’s battery needs to be replaced. In particular, it is wise to change the battery when the power wheel slows down or provides less riding pleasure. So if you want to speed up your child’s power wheel, go for a battery replacement. That’s why keep going through the article to find out a perfect and effective method to replace a power wheel battery.

How to Replace a Power Wheels Battery

When it comes to replacing a power wheels battery, we will recommend you to go with some of the simple steps. By applying the battery conversion method, you can easily replace the battery. Below are the steps required to replace the power wheel battery.

Required Tools

  • Wire crimper
  • Electrical tape
  • 10ga wire
  • Wire stripper
  • Single screwdriver set

Step 1

The first step you need to do is to track the location of the battery. Because not all batteries are in the same place. The battery position of a power wheel may be below the hood. Again, the battery position of a vehicle is below the seat position. Now find out where the battery of your power wheel is.

Step 2

After locating the battery, select a working space. This is because some parts may need to be removed to replace the power wheel’s battery. To get access to the battery compartment again, it takes several screws to detach claws. Therefore, it is better to have an open space. Garage storage can be a good option.

Step 3

At this stage, all you have to do is remove the old existing battery. However, when removing the old battery, make sure that no connection is damaged. So when detaching the connection, just disconnect the wire with the battery.

Step 4

Now, place the new battery in the battery compartment of the power wheel. Then confirm the connection of the power wheel with the battery. You do not need to be an expert to confirm the connection. Only if you can determine the wire connection. For wire connection recognition, there is a color-coding system. Such as red wire indicates positive connection and black wire indicates negative.

So, attach the battery connection with the power wheel. To do this, first, add a negative connection. Next, include the positive connection. Be sure to attach a fuse when enclosing a positive connection. This will protect the battery from producing excess power. So don’t take that matter lightly.

Step 5

You are now in the last step of replacing the battery. Secure them when attaching connections. Use wire stripper for this. Then if there is any long wire cut it with a crimper and make it equal. Another thing is to cover the connections with duct tape. This will not create any spark from there. Finally, take a test drive. Because if you do not test drive, you will not know if the connection is correct.

To test, press the power wheel’s pedal. Then check if the rear wheel is spinning. If the rear wheel of your power wheel spins, it means your battery replication process is correct. But if it makes an exception, re-check where you made a mistake. Use online tutorials or manuals if needed. If you want to know more about Power Wheel Battery, you can follow How To Put A Bigger Battery In A Power Wheel.

Can You Include Double Battery Packs in a Single Power Wheel?

Yes, you can. If you want, you can attach a double battery instead of a battery to the power wheel as a DIY project. But for that, you have to do the battery conversion. For details on battery converging, you can follow How To Put Drill Battery In Power Wheels. From here you can get the necessary facts that will help you to know more about the battery conversion process.

Now many may not be familiar with the term battery pack. A double battery pack means making a connection between another battery of the same or different voltage at the same time. Now you might be wondering what the benefits of installing a double battery pack will be. Well, by inserting a double battery power wheel, you can create a double-speed power wheel.

Additionally, your child will enjoy riding for longer periods. The bottom line is that installing a battery pack will make your child’s car perform at a higher performance than ever before. Now it is very important to have an idea about the correct charging method to maintain the battery. This is why we suggest you to follow How Long Does It Take To Charge A Power Wheel.

FAQs

How Long Does it Take to Replace a Power Wheel Battery?

It is very difficult to answer this question correctly. This is because the duration may vary according to the functionality of the battery. However, it does not take more than 30 to 40 minutes to insert the battery into the power wheel. This period may vary according to your mechanical work skills. But we urge you not to rush into replacing the battery. Otherwise, there may be any wrong connection between you and the vehicle which will not be good.

Is it Possible to Put a Car Battery on Power Wheel?

Yes, it is possible. If you want to get more speed and longer raid performance in your child’s power wheel, you can install a car battery. Because car batteries are relatively larger than power vehicles. Increasing the battery means increasing the performance of the power wheel. If you are willing to know more info regarding the power wheel, you can learn about How To Make My Sons Power Wheel Faster.

Conclusion

As you can see, you can impress your child by replacing a battery. Because with the battery replacement, the power wheel will show a much better and improved performance than before. We hope you find this article useful.

error: Content is DMCA Protected !