Table of Contents
Well, today we will discuss how to make power wheels have more traction? If you want to know how to add traction on car wheels, keep reading the article to know the whole process. So let’s get started without delay.
To get the maximum speed from the power wheels car you have no choice to add good traction to the wheels of the toy car. Also, if your child’s car has good traction, it can run smoothly on any road, snow, wet lawn, or slippery sidewalk. All power wheels on the market come with plastic wheels, which can cause the tires to lose traction quickly.
If you want to get better traction on your child’s toy car wheels then the best way is to attach the rubber to the car wheel surface. This will give you an effective permanent solution. Similarly, you can completely replace plastic tires with rubber.
How to Make Power Wheels Have More Traction
There are several ways you can add traction to your child’s toy car. However, most of the ways are quite easy to do and do not require any skill to fix them. All you have to do is follow the instructions below. Below we have discussed a few ways and included a step-by-step guide to doing each way correctly. Let’s start with the details. To get extra info, follow How To Make Power Wheel Go Faster.
Prepare the Tires
The first thing you need to do is prepare the tires to add traction to the wheels of the toy car. Use fine sandpaper to add some roughness to Pear Wheels car plastic tires before washing them. All you have to do is sand the bottom of the tires and make a sticky surface.
Now you need to clean each groove to remove dirt or dust particles from the plastic tires. Once the dirt is removed from the tires, you can choose to wash them. You can use a large basin to clean the wheels using some dish soap and water to wash these. If you are interested to know more tips, you can go with How To Make Power Wheels Tires Grip Better.
This dish will help remove any granules stuck to the soap plastic wheels. On the other hand, use a toothbrush to reach the small grooves of the wheel tires and make sure they are shiny. If Power Wheels car tires are clean, then the tires need to be well dried.
Install a New Rubber Tire on Toy Car
This step is for you if you want to fix your child’s toy car wheel traction permanently. This is an expensive step, but it will also give your child’s car wheel traction an effective permanent solution. If you find that your child’s wheel traction is not improving then you can choose this step. Almost all power wheels come with plastic wheels.
As a result of using the toy car every day, the traction of the wheels of the car ends quickly. You can add rubber wheels to it to improve the car’s wheel traction. So let us know how to properly attach a rubber wheel to a toy car. Follow the steps below:
- Find rubber tires that are compatible with your child’s toy car model.
- Gather the tools you need, such as hammers, drill machines, and flat face screwdrivers.
- Choose a flat, hard place where you can work easily. It is best if the place is in the garage.
- Now keep the power wheels in an upright position so that the tires can be easily separated from the car.
- Loosen the retainer cap, retainer, hubcap, and finally the tire from the toy car and take them out of the car separately. You will need to use a screwdriver to separate these parts.
- Now grab the new rubber tire and attach it to the place of the old wheel. Then install the hubcap, retainer, and retainer cap one by one on your child’s toy car. Apply force by pushing the parts in and tightening them.
- Once everything has been planted, check again to see if everything is properly planted. You test the car with a test drive to see if everything in the car is OK.
Install Traction Bands on Car Tire
If you want to add traction to your child’s Power Wheels car for less money. Then you can choose this step. This will allow you to add better traction to the toy car wheels for a few months at a lower cost. On the other hand, you don’t have to buy new wheels to add traction to the power wheels. If you want to get more details, learn about How Long Should Power Wheels Battery Last.
All you have to do is buy a traction band, and attach it to the wheels. Many people use this process. Moreover, you do not need any skills to do this job. We think this is a great option for all parents to add traction to their child’s car wheels. There are many types of power wheels available in the market, all of which have specific model bands.
To add traction to the car’s wheels, select the model your child uses and buy a band for that model. Now attach the bands to the plastic wheel tires. In the process, plastic wheels will not turn into rubber wheels, but they will add much better traction to any power wheel. The whole task is very simple, you can do everything yourself.
If your child’s power wheels don’t have good traction, they won’t move fast. This is annoying for a child. Also, if your child’s toy car does not have traction, it is not safe for your child to drive that car. Because the toy does not grip well on the wheels of the car and the car may slip.
So it is important to have good traction on the wheels of the car to keep the car moving fast and to have good stability. We hope that this article will help you to provide the necessary solutions on how to add traction to the plastic power wheel.