How To Assemble Power Wheels Dune Racer

Author:

Published:

Updated:

How To Assemble Power Wheels Dune Racer

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Learn How To Assemble Power Wheels Dune Racer

It’s easy to learn how to assemble power wheels dune racer. But, we won’t be talking on the same topic throughout the blog post. Rather, you’ll get to learn more on Dune Racer Power wheels, in general. Assembling only takes a while to read your manual and apply the steps properly.

A popular battery-operated ride-on toy, the Power Wheels Dune Racer is no surprise. It has been on the market for a while and has attracted a lot of customers. But, it’s important to know how to assemble the parts of a power wheels dune racer.

We’ll show you how to assemble in simple steps. But, as we’ll move forward with the blog post, you’ll find many more information on Dune racer and power wheels, in general.

Assembling a Dune Racer Power Wheels

Steering Wheel

  • Raise the car to its proper position.
  • Assemble the steering wheel and the steering column.

Hint: The steering wheel is only designed to fit one way around the steering column. Turn it around and try again if it doesn’t seem to fit.

  • Use the assembly wrench to tighten a 3/8″ (1 cm) lock nut onto the end of the steering column.
  • Attach the steering wheel cap on the steering wheel’s center. Push the button to make it “snap” into place.

Bumper and Hoods

  • Install the bumper to the front of the automobile and secure it in place.
  • Use four #8 x 34″ (1,9 cm) screws to hold the bumper in place.
  • Connect the hood tabs to the front fender pegs using the hood tab connectors.
  • Using the folded end of the strap attached to the hood, insert it into the front-end slot of the vehicle.
  • Installing the straight end of the steering column up through the bottom of the steering post is a straightforward procedure.

The Benefits of Power Wheels Dune Racer

Perfect Size – Two People

If you have two children who are within the weight range, they should be able to fit together flawlessly. My three-year-old and eighteen-month-old both fit perfectly, with lots of room to spare as they grow.

Although it is a dual seater, the seats are not separated. As a result, your older child will likely occupy the majority of the two or one and a half seats. They won’t notice at all, though! How To Fix Power Wheels Dune Racer.

Two Speed Switching

One of my favorite Dune Racer Extreme features is the two-speed lockout. As a result, it has two speeds: 3mph and 5mph. The 3mph speed is suitable for inexperienced drivers and little children. It was ideal for my three-year-old son, who had never driven an ATV before.

To change to 5mph, unscrew a screw at the base of the gear shift. As a result, your child is unable to modify the speed on his or her own. That’s an excellent safety feature. You would not think that 2mph faster is a huge deal, but it is to a small child.

Backward and Forward Directions

The Dune Racer Extreme can travel forward and backward, making it easier for your child to navigate around turns and obstacles. Your child shifts the gear shift towards their body and then presses the gas pedal to go backwards. After then, move the gear shift toward the steering wheel to go forward once more.

Easy Battery Installation

Flip down the back unit that holds the battery to insert it. To open it, press the button down and it will flip open. Then, using the cord that is attached inside, plug the battery in and slide it back into the housing unit.

The opposite is true for removing the battery. Remove the battery from the housing unit and unplug it. It’s really easy! Best Power Wheel for Big Kid.

Charging and Play Time of the Battery

Concerning the battery, I think it provided adequate playtime. I usually charge the battery overnight, however I believe it takes 10-12 hours on average. You must charge it for 18 months the first time you use it. It worked out so well that we assembled it at night and charged it until the next morning.

In terms of battery power, Power Wheels used a single 12-volt battery. We felt like we received about 2-3 hours of playtime on average. That’s a lot of time in a single day.

You won’t receive as much time if you use it at a faster tempo. When driving at 5mph, the battery may only last 90 minutes, or even less if you’re nearing the maximum weight limit. All of the drive times are predicated on a weight of roughly 70 pounds sat inside the Dune Racer.

More on Dune Racer Power Wheel

The bright green color combined with all of the stickers gave it a mature appearance that made him feel cool while driving it, but it was still appropriate for a child.

The Dune Racer’s small trunk in the front is a nice touch. It has adequate space for your child to bring along some toys or snacks. Although you’re unlikely to take this ATV out on the trails, it does have a feature that makes kids adore it even more.

The Dune Racer’s side bars offer an added touch that elevates the ATV’s overall cool factor. Your children will have plenty of legroom.

Final Thoughts

Children who run on batteries Fisher-ATV Price’s Power Wheels Dune Racer is unquestionably one of the most popular and sought-after ride-on toys on the market today. It’s cool, it’s powerful, it’s exciting, and it’s a lot of fun.

It performs admirably on a variety of terrain, including hills, and provides ample fun for any children on a single charge, lasting up to four hours. So there’s really nothing else to ask for! How Long To Charge Dune Racer Battery.

However, we hope that you can easily assemble a Dune Racer if you buy one. The user manual is simple to follow and has all the relevant details regarding the assembly of the vehicle. But, always call out an expert if you feel confused.

About the author


There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.